Home Up 

Airworthiness Directive
  Hot Topics in the Discussion Forums! Check them out! Great Items for sale at Southwestern Aero Echange!
Home
Up
Discussion Forums
Spar X-Ray Update
Aircraft For Sale
Classifieds
Airworthiness Directives
STC's
Beechcraft Kits
Horsepower Calculations
100 hour inspection
How Much?
Feedback Form



Airworthiness Directives


 

 

-Header Information
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
AD 58-04-02

HARTZELL Models HC-93Z20-2C and -2B Propellers


+Preamble Information

-Regulatory Information

58-04-02 HARTZELL: Applies to All HC-93Z20-2C and -2B Propellers. The -2C Propellers Are Installed on All Beech E50 and F50 Aircraft, and -2B Propellers Are Installed on Some Cessna T-50 With Lycoming R-680 Engines and on Mansdorf Conversion of Grumman G- 44 With Lycoming R-680 Engines (STC SA4-2).

Compliance required prior to next flight for propellers with hub Serial Numbers 100A through 361A and above.

The recent failure of an A-1307 split ring, which the records show had less than 180 hours' operating time, permitted the propeller blade to leave the hub. In order to minimize the possibility of the occurrence of this type of serious failure, the present split ring must be replaced with a strengthened split ring. Accordingly, replace A-1307 split ring with A-1331 split ring. This also requires replacing A-1303 bearing with A-1303A bearing. Modified propellers should be stamped HC-93Z20-2B1 or -2C1. New propellers so stamped will incorporate modified split rings and bearings.

(Hartzell Service Bulletin No. 55 covers this same subject.)


+Footer Information

+Federal Register Information





+Comments

 


 


 

 Back Home Up Next 
Beech18.net
 
Kyle Larson Copyright 2002-2005
Last Modified : 09/02/05 11:20 AM